UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

☒  ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2020

or

For the transition period from _______ to _______

Commission file number 1-7416

(Exact name of registrant as specified in its charter)

Malvern, Pennsylvania 19355-2143

(Address of principal executive offices)

(610) 644-1300

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:  None

Note – Checking the box above will not relieve any registrant required to file reports under Section 13 or 15(d) of the Exchange Act from their obligations under those Sections.

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company.  See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and "emerging growth company" in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

Indicate by checkmark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of the voting stock held by non-affiliates computed by reference to the price at which the common equity was last sold as of the last business day of the registrant’s most recently completed second fiscal quarter ($14.87 on July 4, 2020), assuming conversion of all of its Class B common stock held by non-affiliates into common stock of the registrant, was $1,977,000,000. There is no non-voting stock outstanding.

As of February 22, 2021, registrant had 132,633,616 shares of its common stock and 12,097,148 shares of its Class B common stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s definitive proxy statement, which will be filed within 120 days of December 31, 2020, are incorporated by reference into Part III.

Vishay Intertechnology, Inc.

Form 10-K for the year ended December 31, 2020

Our Business

Vishay Intertechnology, Inc. (“Vishay,” the “Company,” “we,” “us,” or “our”) manufactures one of the world’s largest portfolios of discrete semiconductors and passive electronic components that support innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. Serving customers worldwide, Vishay brands itself as The DNA of tech.™

Semiconductors include MOSFETs, diodes, and optoelectronic components. Passive components include resistors, inductors, and capacitors.  Our semiconductor components are used for a wide variety of functions, including power control, power conversion, power management, signal switching, signal routing, signal blocking, signal amplification, two-way data transfer, one-way remote control, and circuit isolation. Our passive components are used to restrict current flow, suppress voltage increases, store and discharge energy, control alternating current (“AC”) and voltage, filter out unwanted electrical signals, and perform other functions.

The Vishay Story

For almost six decades we have been building what we call The DNA of tech.^TM

The Vishay journey began with one man, the late Dr. Felix Zandman, and a revolutionary technology. In the 1950’s, Dr. Felix Zandman was issued patents for his PhotoStress® coatings and instruments, used to reveal and measure the distribution of stresses in structures such as airplanes and cars under live load conditions. His research in this area led him to develop Bulk Metal® foil resistors – ultra-precise, ultra-stable resistors with performance exceeding any other resistor available to date.

In 1962, Dr. Zandman, with a loan from the late Alfred P. Slaner, founded Vishay to develop and manufacture Bulk Metal foil resistors. Concurrently, J.E. Starr developed foil resistance strain gages, which also became part of Vishay. Throughout the 1960’s and 1970’s, Vishay established itself as a technical and market leader in foil resistors, PhotoStress products, and strain gages.

From that beginning, we grew and strengthened our business both organically and through strategic passive component acquisitions beginning in 1985 and semiconductor acquisitions beginning in the late 1990’s.  From discrete semiconductors to passive components; from the smallest diode to the most powerful capacitor, Vishay manufactures a breadth of products which we call The DNA of tech.™

Through R&D, manufacturing, engineering, quality, sales and marketing, we generate a variety of components that support inventors and innovators creating new generations of products spanning many sectors: automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical.

Together with major manufacturers of electronic products worldwide, we are supporting next level automation in multiple areas, including factories, the electrification of the automobile, 5G network technology, and the rapid expansion of connectivity across everything (IoT).

We continue to implement Dr. Zandman’s vision, strategy, and culture as we work tirelessly to enhance value for our stockholders.

Vishay was incorporated in Delaware in 1962 and maintains its principal executive offices at 63 Lancaster Avenue, Malvern, Pennsylvania 19355-2143. Our telephone number is (610) 644-1300.

Our Competitive Strengths

Global Technology Leader

As industry evolves, The DNA of tech™ evolves.  We were founded based on the inventions of Dr. Felix Zandman and we continue to emphasize technological innovation as a driver of growth.  Many of our products and manufacturing techniques, technologies, and packaging methods have been invented, designed, and developed by Dr. Zandman, our engineers, and our scientists. Our components today are smaller, faster, and more reliable than in the past, helping our customers to be more inventive and evolve their businesses.  Our components are used by virtually all major manufacturers of electronic products worldwide in the automotive, industrial, computing, consumer, telecommunications, military and aerospace, and medical markets.  They are found inside products and systems used every day, from automobiles to airplanes, power grids, phones, and pacemakers.  We are currently a worldwide technology and market leader in wirewound and other power resistors, leaded film resistors, thin film SMD resistors, power inductors, wet and conformal-coated tantalum capacitors, capacitors for power electronics, power rectifiers, low-voltage power MOSFETs, and infrared components.

Research and Development Provides Customer-Driven Growth Solutions

We maintain strategically placed application and product support centers where proximity to customers and our manufacturing locations enables us to more easily gauge and satisfy the needs of local markets. The breadth of our product portfolio along with the proximity of our field application engineers to customers provides increased opportunities to have our components selected and designed into new end products by customers in all relevant market segments. We also maintain research and development personnel and promote programs at a number of our production facilities to develop new products and new applications of existing products, and to improve manufacturing processes and technologies. We plan to grow our business and increase earnings per share, in part, through accelerating the development of new products and technologies and increasing design-in opportunities by expanding our technical resources for providing solutions to customers.

Operational Excellence

We are a leading manufacturer in our industry, with a broad product portfolio, access to a wide range of end markets and sales channels, and geographic diversity. We have solid, well-established relationships with our customers and strong distribution channels. Our senior management team is highly experienced, with deep industry knowledge. Over the past two decades, our management team has successfully restructured our company and integrated several acquisitions. We can adapt our operations to changing economic conditions, as demonstrated by our ability to remain profitable and generate cash through the volatile economic cycle of the recent past.

Broad Market Penetration

We have one of the broadest product lines of discrete semiconductors and passive components among our competitors. Our broad product portfolio allows us to penetrate markets in all industry segments and all regions, which reduces our exposure to a particular end market or geographic location. We plan to grow our business and increase earnings per share, in part, through improving market penetration by expanding manufacturing facilities for our most successful products, increasing technical resources, and developing markets for specialty products in Asia.  See Note 15 to our consolidated financial statements for net revenues by region and end market.

Strong Track Record of Growth through Acquisitions

Since 1985, we have expanded our product line through various strategic acquisitions, growing from a small manufacturer of precision resistors and resistance strain gages to one of the world’s largest manufacturers and suppliers of a broad line of electronic components. We have successfully integrated the acquired companies within our existing management and operational structure, reducing selling, general, and administrative expenses through the integration or elimination of redundant sales and administrative functions, creating manufacturing synergies, while improving customer service. We plan to grow our business and increase earnings per share, in part, through targeted acquisitions.  We have often targeted high margin niche business acquisitions.  We also target strategic acquisitions of businesses with technology and engineering capabilities that we can use to grow our business.

Strong Free Cash Flow Generation

We refer to the amount of cash generated from operations in excess of our capital expenditure needs and net of proceeds from the sale of assets as “free cash” (see "Overview" included in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” for "free cash" definition and reconciliation to generally accepted accounting principles ("GAAP")).  Due to our strong operational management, cost control measures, efficient capital expenditures, broad product portfolio, and strong market position, we have generated positive “free cash” in each of the past 24 years and “free cash” in excess of $80 million in each of the past 19 years.  We expect the benefits of our restructuring and other cost cutting measures (see “Cost Management” included in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations”) to contribute to our “free cash” generation going forward.

Financial Strength and Flexibility

As of December 31, 2020, our cash and short-term investment balance exceeded our debt balance by $383.5 million.  We also maintain a credit facility, which provides a revolving commitment of up to $750 million through June 5, 2024, which was substantially all available as of December 31, 2020.  Our net cash position and short-term investment balance, available revolving commitment, and strong “free cash” flow generation provide financial strength and flexibility and reduce our exposure to future economic uncertainties.

Our Key Challenges

Economic Environment

Our business and operating results have been and will continue to be impacted by the global economy and the local economies in which our customers operate. Our revenues are dependent on end markets that are impacted by fluctuating consumer and industrial demand, and our operating results can be adversely affected by reduced demand in those markets.

Competition

Our business is highly competitive worldwide, with low transportation costs and few import barriers. Our major competitors, some of which are larger than us, have significant financial resources and technological capabilities. To continue to grow our business successfully, we need to continually develop, introduce, and market new and innovative products, modify existing products, respond to technological change, and customize certain products to meet customer requirements.

Continuous Innovation and Protection of Intellectual Property

Our ability to compete effectively with other companies depends, in part, on our ability to maintain the proprietary nature of our technology. Although we have been awarded, have filed applications for, or have licenses to use, numerous patents in the United States and other countries, there can be no assurance concerning the degree of protection afforded by these patents or the likelihood that pending patents will be issued.

Continuing to Grow through Acquisitions

Our long-term historical growth in revenues and net earnings has resulted in large part from our strategy of growth through acquisitions. For this strategy to remain successful, we need to continue to identify attractive and available acquisition candidates, complete acquisitions on favorable terms, and integrate new businesses, manufacturing processes, employees, and logistical arrangements into our existing management and operating infrastructure.

Recent Events: COVID-19 Pandemic

Our business has been adversely impacted by the widespread global outbreak of COVID-19.  Impacts have included disruptions in our ability to manufacture products and disruptions in the operations of our customers and modes of shipping. To continue to be successful, we will need to continue to adapt our business and operations for the impacts of the COVID-19 pandemic and potential future coronavirus outbreaks and the mitigation efforts by governments to attempt to control their spread.

Recent Events: Global Trade Disruption

Established global trade agreements and procedures are being challenged, particularly by the U.S. government.  Trade disputes have resulted in tariffs and other trade restrictions including import / export prohibitions. Disruptions to global trade could result in customers seeking different sources of product and reducing our revenues, or requiring us to seek different sources of supply and increasing our costs.  New or revised trade agreements could negatively impact profitability or require changes in operations in the long-term.  We remain cognizant of these challenges and seek to minimize their effects whenever possible.

For a more detailed discussion of the risks and uncertainties inherent in our business, which could materially and adversely affect our business, results of operations or financial condition, see “Risk Factors” in Item 1A.

Key Business Strategies

Since our first acquisition in 1985, we have pursued a business strategy that principally consists of the following elements:

Invest in Innovation to Drive Growth

We plan to continue to use our research and development (“R&D”), engineering, and product marketing resources to continually roll out new and innovative products. As part of our plan to foster intensified internal growth, we have increased our worldwide R&D and engineering technical staff, and increased our technical field sales force in Asia to increase opportunities to design-in our products in local markets.  Our ability to react to changing customer needs and industry trends will continue to be key to our success.  We intend to leverage our insights into customer demand to continually develop new innovative products within our existing lines and to modify our existing core products to make them more appealing, addressing changing customer needs and industry trends.

We are directing increased funding and are focusing on developing products to capitalize on the connectivity, mobility, and sustainability growth drivers of our business.

Cost Management

We place a strong emphasis on controlling our costs. We focus on controlling fixed costs and reducing variable costs. When our ongoing cost management activities are not adequate, we take actions to maintain our cost competitiveness including restructuring our business to improve efficiency and operating performance.

Growth through Strategic Acquisitions

We plan to continue to expand within the electronic components industry, through the acquisition of other manufacturers of electronic components that have established positions in major markets, reputations for product innovation, quality, and reliability, strong customer bases, and product lines with which we have substantial marketing and technical expertise.

Customer Service Excellence

We maintain significant production facilities in those regions where we market the bulk of our products in order to enhance the service and responsiveness that we provide to our customers. We aim to further strengthen our relationships with customers and strategic partners by providing broad product lines that allow us to provide “one-stop shop” service, whereby they can streamline their design and purchasing processes by ordering multiple types of products.

Our growth plan was designed based on the tenets of the key business strategies listed above.

Products

We design, manufacture, and market electronic components that cover a wide range of functions and technologies.  Our products include both commodity and non-commodity products in which we believe we enjoy a good reputation and strong brand recognition, including our Siliconix, Dale, Draloric, Beyschlag, Sfernice, MCB, UltraSource, Applied Thin-Film Products, IHLP®, HiRel Systems, Sprague, Vitramon, Roederstein, ESTA, and BCcomponents brands.  We promote our ability to provide “one-stop shop” service to customers, whereby they can streamline their design and purchasing processes by ordering multiple types of products from Vishay.  Our technical sales force consisting of field application engineers offers customers the complete breadth of the Vishay portfolio for their applications. We aim to use this broad portfolio to increase opportunities to have our components selected and “designed in” to new end products.

Product Segments

Our products can be divided into two general classes: semiconductors and passive components. Semiconductors are sometimes referred to as “active components” because they require power to function whereas passive components do not require power to function.  Our semiconductor and passive components products are further categorized based on their functionality for financial reporting purposes.

Semiconductors

Our semiconductor products include metal oxide semiconductor field-effect transistors ("MOSFETs"), diodes, and optoelectronic components. Semiconductors are typically used to perform functions such as switching, amplifying, rectifying, routing, or transmitting electrical signals, power conversion, and power management.

MOSFETs function as solid state switches to control power.  Our MOSFETs business includes both the commodity and non-commodity markets in which we believe that we enjoy a good reputation and strong brand recognition (Siliconix). MOSFETs applications include mobile phones, notebook and desktop computers, tablet computers, digital cameras, televisions, DC/DC and AC/DC switch mode power supplies, solar inverters, automotive and industrial systems. We are a leader in low-voltage TrenchFET MOSFETs and also offer high-voltage MOSFETs. Our MOSFETs product line includes low- and medium-voltage TrenchFET MOSFETs, high-voltage planar MOSFETs, high voltage Super Junction MOSFETs, power integrated circuits (power ICs), and integrated function power devices. We are one of the technology leaders in MOSFETs, with a tradition of innovation in wafer design, packaging, and performance.

Diodes route, regulate, and block radio frequency, analog, and power signals; protect systems from surges or electrostatic discharge damage; or provide electromagnetic interference filtering.  Our Diodes business is a solid business with a strong market presence in both the commodity and non-commodity markets. The products that comprise our Diodes business represent our broadest product line and include rectifiers, small signal diodes, protection diodes, thyristors/SCRs and power modules. The primary application of rectifiers, found inside the power supplies of virtually all electronic equipment, is to derive DC power from the AC supply. Vishay is the worldwide leader in rectifiers, having a broad technology base and a good position in automotive, industrial, computing and consumer markets. Our rectifier innovations include TMBS® using Trench MOS barrier Schottky rectifier technology, which reduces power loss and improves the efficiency of end systems and eSMP®, the best in class high-current density surface mount packages. Our wide selection of small signal diodes consist of the following functions: switching, tuning, band-switching, RF attenuation and voltage regulation (Zener). They are available in various glass and plastic packaging options and generally are used in electronic circuits, where small currents and high frequencies are involved. Vishay is also one of the market leaders for TVS (transient voltage suppressor) diodes. The portfolio of protection diodes includes ESD protection and EMI filter. Our thyristors or SCR (silicon-controlled rectifiers) are very popular in the industrial high-voltage AC power control applications. The fast growing markets of solar inverter and HEV/EV are the focus of our power modules business (IGBT or MOSFET modules). These modules can be customized to fit in different customer design requirements.

Optoelectronic components emit light, detect light, or do both.  Our Optoelectronic Components business has a strong market presence in both the commodity and non-commodity markets.  Our broad range of standard and customer specific optoelectronic components includes infrared (“IR”) emitters and detectors, IR remote control receivers, optocouplers, solid-state relays, optical sensors, light-emitting diodes (“LEDs”), 7-segment displays, and IR data transceiver modules (IrDA®). Our IR remote control receivers are designed for use in infrared remote control, data transmission, and light barrier applications in end products including televisions, set-top boxes, notebook computers, and audio systems. We are the leading manufacturer of IR remote control receivers. Our optocouplers electrically isolate input and output signals. Uses include switch-mode power supplies, consumer electronics, telecommunications equipment, solar inverters, and industrial systems. Our IR data transceiver modules are used for short range, two-way, high-speed, and secure wireless data transfer between electronic devices such as home medical appliances, mobile phones, industrial data loggers, and metering. Our optical sensors product line was considerably strengthened by our acquisition of Capella in 2014.  Our optical sensors products include ambient light sensors, optical encoders, integrated photodiode and I/V amplifiers, proximity sensors, color sensors, and UV sensors.  Applications include telecommunications, mobile phones, smartphone, handheld devices, digital cameras, laptops, desktop computers, LED backlighting, office automation equipment, household electrical appliance and automotive electronics.  Our LEDs are designed for backlighting and illumination in automotive and other applications. Our LEDs include ultra-bright as well as small surface-mount packages, with products available in all standard colors including white.

Passive Components

Our passive components include resistors, inductors, and capacitors. Passive components are used to store electrical charges, to limit or resist electrical current, and to help in filtering, surge suppression, measurement, timing, and tuning applications.

Resistors impede electric current.  Resistors are basic components used in all forms of electronic circuitry to adjust and regulate levels of voltage and current.  Our Resistors business is our original business. We maintain the broadest portfolio of resistor products worldwide.  Under current market conditions, the business is solid, predictable, and growing at relatively stable selling prices.  We are a market leader with a strong technology base, many specialty products, and strong brand recognition (such as our Dale, Draloric, Beyschlag, and Sfernice brands). We focus on higher value markets in specialized industries, while maintaining a complete portfolio of commodity products.  We do not aim to be the volume leader in commodity markets.

Resistors vary widely in precision and cost, and are manufactured from numerous materials and in many forms.  Linear resistive components are classified as variable or fixed, depending on whether or not their resistance is adjustable. Non-linear resistors function by varying in resistance under influence of temperature (thermistors) or voltage (varistors). They can be used in temperature-measuring applications or as current or voltage-limiting devices. We manufacture virtually all types of fixed resistors, both in discrete and network forms, as well as many variable types.

Vishay resistor innovations include Power Metal Strip® technology.  These resistors feature very low resistance and are used to measure changes in current flow (current sensing) or divert current flow (shunting).

Inductors also impede electric current.  Inductors use an internal magnetic field to change alternating current phase and resist alternating current.  While part of our traditional business, the inductors product line has grown significantly in recent years.  We are a market leader with a strong technology base, many specialty products, and strong name recognition (such as our IHLP® and HiRel Systems brands). We focus on higher value markets in specialized industries, such as the industrial, automotive, military, and medical end markets.

Inductor applications include controlling AC current and voltage, filtering out unwanted electrical signals, and energy storage. Vishay inductor innovations include our patented IHLP low-profile, high-current inductor technology with industry-leading specifications. Our low-profile, high-current inductors save circuit board space and power in voltage regulator module (“VRM”) and DC to DC converter applications. In addition, we are a worldwide leader in custom magnetic solutions focusing on high performance and high reliability.

Capacitors store energy and discharge it when needed.  Our Capacitors business consists of a broad range of reliable, high-quality products. We have a strong presence worldwide in specialty markets based on our product performance and reliability and strong brand recognition (including our Sprague, Vitramon, Roederstein, BCcomponents, and ESTA brands). We focus on higher value markets in specialized industries, while maintaining a complete portfolio of commodity products. We do not aim to be the volume leader in commodity markets. Capacitors are used in almost all electronic circuits. They store energy and discharge it when needed. Important applications for capacitors include electronic filtering for linear and switching power supplies; decoupling and bypass of electronic signals for integrated circuits and circuit boards; and frequency control, timing and conditioning of electronic signals for a broad range of applications.

We manufacture products based on all major capacitor technologies: tantalum (molded chip tantalum, coated chip tantalum, solid through-hole tantalum, wet tantalum, and polymer), ceramic (multilayer chip and ceramic disc), film, power, heavy-current, and aluminum electrolytic. Our capacitors range from tiny surface-mount devices for hearing aids and mobile devices to large power correction capacitors used in renewable energy, heavy industry, and electrical power grids. We are a recognized technology leader in many product ranges, securing our strong position in military and medical markets, and in a wide range of industrial and automotive applications. Our wet tantalum and MicroTan™ technologies are market leaders.

Military Qualifications

We have qualified certain of our products under various military specifications approved and monitored by United States government agencies, and under certain European military specifications. Qualification levels are based in part upon the rate of failure of products. In order to maintain the classification level of a product, we must continuously perform tests on the product and the results of these tests must be reported to the government agencies. If the product fails to meet the requirements for the applicable classification level, the product’s classification may be reduced to a lower level.  During the time that the classification level is reduced for a product with military application, net revenues and earnings attributable to that product may be adversely affected.

Manufacturing Operations

In order to better serve our customers, we maintain production facilities in locations where we market the bulk of our products, such as the United States, Germany, and Asia. To optimize production efficiencies, we have whenever practicable established manufacturing facilities in countries, such as India, Israel, Malaysia, Mexico, the People’s Republic of China, and the Philippines, where we can benefit from lower labor costs and also benefit from various government incentives, including tax relief.

One of our most sophisticated manufacturing operations is the production of power semiconductor components. This manufacturing process involves two phases of production: wafer fabrication and assembly (or packaging). Wafer fabrication subjects silicon wafers to various thermal, metallurgical, and chemical process steps that change their electrical and physical properties. These process steps define cells or circuits within numerous individual devices (termed “dies” or “chips”) on each wafer. Assembly is the sequence of production steps that divides the wafer into individual chips and encloses the chips in structures (termed “packages”) that make them usable in a circuit. Both wafer fabrication and assembly phases incorporate wafer level and device level electrical testing to ensure that device design integrity has been achieved.

In the United States, our manufacturing facilities are located in California, Connecticut, Minnesota, Nebraska, New Hampshire, New York, Rhode Island, South Dakota, Vermont, and Wisconsin. In Asia, our main manufacturing facilities are located in the People’s Republic of China, the Republic of China (Taiwan), India, and Malaysia. In Europe, our main manufacturing facilities are located in Germany, France, and the Czech Republic. We have substantial manufacturing facilities in Israel. We also have manufacturing facilities in Austria, Dominican Republic, Japan, Hungary, Italy, Mexico, Portugal, and the Philippines. Over the past several years, we have invested substantial resources to increase the efficiency of our plants, which we believe will further reduce production costs.

All of our manufacturing operations have received ISO 9001 certification.  ISO 9001 is a comprehensive set of quality program standards developed by the International Standards Organization.

Sources of Supplies

Although most materials incorporated in our products are available from a number of sources, certain materials, including plastics and metals, are available only from a relatively limited number of suppliers or are subject to significant price volatility.

We are a major consumer of the world’s annual production of tantalum, a metal used in the manufacturing of tantalum capacitors. There are few suppliers that process tantalum ore into capacitor grade tantalum powder.

Certain materials, in addition to tantalum and including tin, tungsten, and gold are available only from a relatively limited number of suppliers, the source for which may be in the Democratic Republic of the Congo ("DRC") or an adjoining country. We are working to have a supply chain that is 100% certified conflict-free.

Palladium, a metal used to produce multi-layer ceramic capacitors, is currently found primarily in South Africa and Russia. Palladium is a commodity metal that is subject to price volatility. We periodically enter into short-term commitments to purchase palladium.

Certain metals used in the manufacture of our products, such as copper, are traded on active markets, and can be subject to significant price volatility.  Our policy is to enter into short-term commitments to purchase defined portions of annual consumption of these metals if market prices decline below budget.

Inventory and Backlog

We manufacture both standardized products and those designed and produced to meet customer specifications. We maintain an inventory of standardized components and monitor the backlog of outstanding orders for our products.

We include in our backlog only open orders that we expect to ship in the next twelve months. Many of our customers encounter uncertain and changing demand for their products. They typically order products from us based on their forecasts. If demand falls below customers’ forecasts, or if customers do not control their inventory effectively, they may cancel or reschedule the shipments included in our backlog, in many instances without the payment of any penalty. Therefore, our backlog at any point in time is not necessarily indicative of the results to be expected for future periods.

Customers and Marketing

We sell our products to original equipment manufacturers (“OEMs”), electronic manufacturing services (“EMS”) companies, which manufacture for OEMs on an outsourcing basis, and independent distributors that maintain large inventories of electronic components for resale to OEMs and EMS companies. See Note 15 to our consolidated financial statements for net revenues by customer type.

Our sales organizations are regionally based. While our sales and support procedures are typically similar across all regions, we remain flexible in our ability to offer programs tailored to our customers’ specific support requirements in each local area.  The aim of our sales organizations is supporting our customers across all product lines, developing new design wins, negotiating contracts, and providing general commercial support as would normally be expected of a large multi-national sales force.

We have an established Strategic Global Account program, which provides each of our top customers with a dedicated Strategic Global Account Manager. Our Strategic Global Account Managers are typically highly experienced salesmen or saleswomen who are capable of providing key customers with the coordination and management visibility required in a complex multi-product business relationship. They typically coordinate the sales, pricing, contract, logistic, quality, and other aspects of the customer’s business requirements.  The Strategic Global Account Manager normally is the focal point of communication between Vishay and our main customers.  We maintain a similar program for our strategic distributors as well.

We work with our customers so that our products are incorporated into the design of electronic equipment at the earliest stages of development and to provide technical and applications support. In addition to our staff of direct field sales personnel, independent manufacturers’ representatives, and distributors, our Business Development group maintains teams of dedicated Field Application Engineers (“FAEs”) to assist our customers in solving technical problems and in developing products to meet specific customer application needs using our entire product portfolio to provide support for our customers’ engineering needs. Organized by market segment, our Business Development FAEs bring specific knowledge of component applications in their areas of expertise in the automotive, telecommunications, computer, consumer/entertainment, industrial, peripherals, digital consumer, and other market segments. With the ultimate goal of a Vishay “design-in” – the process by which our customers specify a Vishay component in their products – this program offers our customers enhanced access to all Vishay technologies while at the same time increasing design wins, and ultimately sales, for us. Most importantly, the process is closely monitored via a proprietary database developed by our Business Development group. Our database captures specific design activities and allows for real-time measurement of new business potential for our management team.

Our top 30 customers have been relatively stable despite not having long-term commitments to purchase our products. With selected customers, we have signed longer term (greater than one year) contracts for specific products. Net revenues from our top 30 customers represent approximately 70% of our total net revenues.  No single customer comprised more than 10% of our total net revenues for 2020.

In certain areas we also work with sales representatives. The commission expense for these sales representatives is not material.

Research and Development

Many of our products and manufacturing techniques, technologies, and packaging methods have been invented, designed, and developed by Dr. Felix Zandman, our engineers, and our scientists. We maintain strategically placed design centers where proximity to customers enables us to more easily gauge and satisfy the needs of local markets. These design centers are located predominantly in the United States, Germany, Italy, Israel, the People’s Republic of China, France, and the Republic of China (Taiwan).

We also employ research and development personnel and promote programs at a number of our production facilities to develop new products and new applications of existing products and to improve manufacturing processes and technologies.  This decentralized system encourages product development at individual manufacturing facilities, closer to our customers.

Competition

We face strong competition in various product lines from both domestic and foreign manufacturers. Our primary competitors by product type include:

There are many other companies that produce products in the markets in which we compete.

Our competitive position depends on our ability to maintain a competitive advantage on the basis of product quality, know-how, proprietary data, market knowledge, service capability, technological innovation, business reputation, and price competitiveness. Our sales and marketing programs aim to compete by offering our customers a broad range of world-class technologies and products, superior global sales and distribution support, and a secure and multi-location source of product supply.

Recently there has been a considerable amount of consolidation activity in the electronic component industry, some of which involved our primary competitors.  We view the industry consolidation as an opportunity for us to gain business as an independent second-source supplier.

Patents and Licenses

We have made a significant investment in securing intellectual property protection for our technology and products. We seek to protect our technology by, among other things, filing patent applications for technology considered important to the development of our business. We also rely upon trade secrets, unpatented know-how, continuing technological innovation, and the aggressive pursuit of licensing opportunities to help develop and maintain our competitive position.

Our ability to compete effectively with other companies depends, in part, on our ability to maintain the proprietary nature of our technology. Although we have been awarded, have filed applications for, or have been licensed under, numerous patents in the United States and other countries, there can be no assurance concerning the degree of protection afforded by these patents or the likelihood that pending patents will be issued.

We require all of our technical, research and development, sales and marketing, and management employees and most consultants and other advisors to execute confidentiality agreements upon the commencement of employment or consulting relationships with us. These agreements provide that all confidential information developed or made known to the entity or individual during the course of the entity’s or individual’s relationship with us is to be kept confidential and not disclosed to third parties except in specific circumstances. Substantially all of our technical, research and development, sales and marketing, and management employees have entered into agreements providing for the assignment to us of rights to inventions made by them while employed by us.

When we believe other companies are misappropriating our intellectual property rights, we vigorously enforce those rights through legal action, and we intend to continue to do so.  See Item 3, “Legal Proceedings.”

Although we have numerous United States and foreign patents covering certain of our products and manufacturing processes, no particular patent is considered individually material to our business.

Human Capital

Regulatory Compliance

We are required to comply with numerous regulations that are normal and customary to businesses in our industry and the jurisdictions in which we operate.  These regulations relate to, among other things, environmental health and safety, procurement integrity, export control, government security regulations, employment practices, accuracy of records and the recording of costs, anti-corruption, and privacy.  See Item 1A, “Risk Factors,” for additional discussion of such regulations and the potential consequences for non-compliance.

Environmental Health and Safety

We have adopted an Environmental Health and Safety Corporate Policy that commits us to achieve and maintain compliance with applicable environmental laws, to promote proper management of hazardous materials for the safety of our employees and the protection of the environment, and to minimize the hazardous materials generated in the course of our operations. This policy is implemented with accountability directly to the Board of Directors.  In addition, our manufacturing operations are subject to various federal, state, and local laws restricting discharge of materials into the environment.

We are involved in environmental remediation programs at various sites currently or formerly owned by us and our subsidiaries both within and outside of the U.S., in addition to involvement as a potentially responsible party (“PRP”) at Superfund sites. Certain obligations as a PRP have arisen in connection with business acquisitions. The remediation programs are on-going and the ultimate cost of site cleanup is difficult to predict given the uncertainties regarding the extent of the required cleanup, the interpretation of applicable laws and regulations and alternative cleanup methods. See Item 3, “Legal Proceedings.”

We are not involved in any pending or threatened proceedings that would require curtailment of our operations.  We continually expend funds to ensure that our facilities comply with applicable environmental regulations.  While we believe that we are in material compliance with applicable environmental laws, we cannot accurately predict future developments and do not necessarily have knowledge of all past occurrences on sites that we currently occupy.  More stringent environmental regulations may be enacted in the future, and we cannot determine the modifications, if any, in our operations that any such future regulations might require, or the cost of compliance with such regulations. Moreover, the risk of environmental liability and remediation costs is inherent in the nature of our business and, therefore, there can be no assurance that material environmental costs, including remediation costs, will not arise in the future.

With each acquisition, we attempt to identify potential environmental concerns and to minimize, or obtain indemnification for, the environmental matters we may be required to address.  In addition, we establish reserves for specifically identified potential environmental liabilities. We believe that the reserves we have established are adequate. Nevertheless, we have in the past and may in the future inherit certain pre-existing environmental liabilities, generally based on successor liability doctrines.  Although we have never been involved in any environmental matter that has had a material adverse impact on our overall operations, there can be no assurance that in connection with any past or future acquisition we will not be obligated to address environmental matters that could have a material adverse impact on our operations.

Company Information and Website

We file annual, quarterly, and current reports, proxy statements, and other documents with the Securities and Exchange Commission (“SEC”) under the Securities Exchange Act of 1934. The SEC maintains an Internet website that contains reports, proxy and information statements, and other information regarding issuers, including us, that file electronically with the SEC. The public can obtain any documents that we file with the SEC at http://www.sec.gov.

In addition, our company website can be found on the Internet at www.vishay.com. The website contains information about us and our operations. Copies of each of our filings with the SEC on Form 10-K, Form 10-Q, and Form 8-K, and all amendments to those reports, can be viewed and downloaded free of charge as soon as reasonably practicable after the reports and amendments are electronically filed with or furnished to the SEC. To view the reports, access ir.vishay.com and click on “SEC Filings.”

The following corporate governance related documents are also available on our website:

To view these documents, access ir.vishay.com and click on “Corporate Governance.”

Any of the above documents can also be obtained in print by any stockholder upon request to our Investor Relations Department at the following address:

Corporate Investor Relations

Vishay Intertechnology, Inc.

63 Lancaster Avenue

Malvern, PA 19355-2143

From time to time, information provided by us, including but not limited to statements in this report, or other statements made by or on our behalf, may contain “forward-looking” information within the meaning of the Private Securities Litigation Reform Act of 1995. Such statements involve a number of risks, uncertainties, and contingencies, many of which are beyond our control, which may cause actual results, performance, or achievements to differ materially from those anticipated. Set forth below are important factors that could cause our results, performance, or achievements to differ materially from those in any forward-looking statements made by us or on our behalf. You should understand that it is not possible to predict or identify all such factors. Consequently, you should not consider the following to be a complete discussion of all potential risks or uncertainties.

Risks relating to our business

The widespread global outbreak of COVID-19 has adversely affected our business.  Impacts have included disruptions in our ability to manufacture products and disruptions in the operations of our customers and modes of shipping. While we are unable to accurately predict the full extent to which the COVID-19 pandemic and the mitigation efforts by governments to attempt to control its spread will have on our business due to numerous uncertainties, thus far the impacts have resulted in increased costs and a reduction in sales to certain regions and end-markets. We cannot predict when the impact of the COVID-19 pandemic will end or when future coronavirus outbreaks or pandemics will occur.

The potential risks and effects of the COVID-19 pandemic and the related economic crisis that could have an adverse effect on our business include, but are not limited to:

Such effects could result in us being required to record impairment charges related to our property and equipment, intangible assets, or goodwill.

The electronic component industry is highly cyclical and experiences periods of decline from time to time. We and others in the electronic component industry have experienced these conditions in the recent past and cannot predict when we may experience downturns in the future.  Market conditions, such as during a decline in product demand on a global basis, could result in order cancellations and deferrals, lower average selling prices, and a material and adverse impact on our results of operations. These declines in demand are usually driven by market conditions in the end markets for our products, but may also result from distributors not appropriately managing their inventory levels.

We may also experience intense demand for our products in periods of a rising economy and we may have difficulty expanding our manufacturing capacity to satisfy demand during such periods.  Factors which could limit such expansion include delays in procurement of manufacturing equipment, shortages of skilled personnel, and physical constraints on expansion of our facilities.

Changes in the demand mix, needed technologies, and these end markets may adversely affect our ability to match our products, inventory, and capacity to meet customer demand and could adversely affect our operating results and financial condition.  A slowdown in demand or recessionary trends in the global economy makes it more difficult for us to predict our future sales and manage our operations, and could adversely impact our results of operations. Capacity that we add during upturns in the business cycle may result in excess capacity during periods when demand for our products recede, resulting in inefficient use of capital which could also adversely affect us.

To remain competitive, particularly when business conditions are difficult, we sometimes attempt to reduce our cost structure by restructuring our existing businesses, where we seek to achieve synergies, eliminate redundant facilities and staff positions, and move operations, where possible, to jurisdictions with lower labor costs.  We incurred restructuring costs in 2020 and 2019 to implement global cost reduction and management rejuvenation programs as part of our continuous efforts to improve efficiency and operating performance.  We also incurred significant restructuring expenses from 2014 to 2017, including accelerated depreciation expenses related to assets that were no longer used after the implementation of the associated restructuring programs.

Our long-term historical growth in revenues and net earnings has resulted in large part from our strategy of expansion through acquisitions. Despite our plan to continue to grow, in part, through targeted acquisitions, we may be unable to continue to identify, have the financial capabilities to acquire, or successfully complete transactions with suitable acquisition candidates. We are subject to various U.S. and foreign competition laws and regulations that may affect our ability to complete certain acquisitions. Also, if an acquired business fails to operate as anticipated, cannot be successfully integrated with our other businesses, or we cannot effectively mitigate the assumed, contingent, and unknown liabilities acquired, our results of operations, financial condition, enterprise value, market value, and prospects could all be materially adversely affected.

Our future operating results are dependent on our ability to continually develop, introduce, and market new and innovative products, to modify existing products, to respond to technological change, and to customize certain products to meet customer requirements. There are numerous risks inherent in this process, including the risks that we will be unable to anticipate the direction of technological change or that we will be unable to develop and market new products and applications in a timely fashion to satisfy customer demands. If this occurs, we could lose customers and experience adverse effects on our financial condition and results of operations.

In addition to our own research and development initiatives, we periodically invest in technology start-up enterprises, in which we may acquire a controlling or noncontrolling interest but whose technology would be available to be commercialized by us. There are numerous risks in investments of this nature including the limited operating history of such start-up entities, their need for capital, and their limited or absence of production experience, as well as the risk that their technologies may prove ineffective or fail to gain acceptance in the marketplace. Certain of our historical investments in start-up companies have not succeeded, and there can be no assurance that our current and future investments in start-up enterprises will prove successful.

Many of our products require the use of raw materials that are produced in only a limited number of regions around the world or are available from only a limited number of suppliers. Our results of operations may be materially adversely affected if we have difficulty obtaining these raw materials, the quality of available raw materials deteriorates, or there are significant price increases for these raw materials. The determination that any of the raw materials used in our products are so called "conflict minerals" originating from the Democratic Republic of the Congo or adjoining countries could increase the probability that we will encounter the challenges noted above, incur additional expenses to comply with government regulations, and face public scrutiny.  For periods in which the prices of these raw materials are rising, we may be unable to pass on the increased cost to our customers, which would result in decreased margins for the products in which they are used.  For periods in which the prices are declining, we may be required to write down our inventory carrying cost of these raw materials, because we record our inventory at the lower of cost or market.  Depending on the extent of the difference between market price and our carrying cost, this write-down could have a material adverse effect on our results of operations.

From time to time there have been short-term market shortages of certain raw materials used in our products. While these shortages have not historically adversely affected our ability to increase production of products containing these materials, they have historically resulted in higher raw material costs for us. We cannot make any assurances that any of these market shortages in the future would not adversely affect our ability to increase production, particularly during periods of growing demand for our products.  To assure availability of raw materials in times of shortage, we may enter into long-term supply contracts for these materials, which may prove costly, unnecessary, and burdensome when the shortage abates.

Protection of intellectual property often involves complex legal and factual issues. We will be able to protect our proprietary rights from unauthorized use by third parties only to the extent that our proprietary technologies are covered by valid and enforceable patents or are effectively maintained as trade secrets. We have applied, and will continue to apply, for patents covering our technologies and products, as we deem appropriate. However, our applications may not result in issued patents. Also, our existing patents and any future patents may not be sufficiently broad to prevent others from practicing our technologies or from developing competing products. Others may independently develop similar or alternative technologies, design around our patented technologies, or may challenge or seek to invalidate our patents. Also, the legal system in certain countries in which we operate may not provide or may not continue to provide sufficient, intellectual property legal protections and remedies.

Litigation regarding patent and other intellectual property rights is prevalent in the electronic components industry, particularly the discrete semiconductor sector. We have on occasion been notified that we may be infringing on patent and other intellectual property rights of others. In addition, customers purchasing components from us have rights to indemnification under certain circumstances if such components violate the intellectual property rights of others. Further, we have observed that in the current business environment, electronic component and semiconductor companies have become more aggressive in asserting and defending patent claims against competitors.  We will continue to vigorously defend our intellectual property rights, and may become party to disputes regarding patent licensing and cross patent licensing. Although licenses are generally offered in such situations and we have successfully resolved these situations in the past, there can be no assurance that we will not be subject to future litigation alleging intellectual property rights infringement, or that we will be able to obtain licenses on acceptable terms. An unfavorable outcome regarding one of these matters could have a material adverse effect on our business and results of operations.

Our business is highly competitive worldwide, with low transportation costs and few import barriers. We compete principally on the bases of product quality and reliability, availability, customer service, technological innovation, timely delivery, and price. The electronic component industry has become increasingly concentrated and globalized in recent years as many of our primary competitors have been acquired.  The acquiring companies, most of which are larger than us, have significant financial resources and technological capabilities.

Our customers have also become increasingly concentrated in recent years, and as a result, their buying power has increased and they have had greater ability to negotiate favorable pricing and terms. This trend has adversely affected our average selling prices, particularly for commodity components.

Many of the orders that comprise our backlog may be canceled by our customers without penalty. Our customers may on occasion double and triple order components from multiple sources to ensure timely delivery when demand exceeds global supply. They often cancel orders when business is weak and inventories are excessive. Therefore, we cannot be certain that the amount of our backlog accurately reflects the level of orders that we will ultimately deliver. Our results of operations could be adversely impacted if customers cancel a material portion of orders in our backlog.

Rapid changes in technologies, frequent new product introductions, and declining average selling prices over product life cycles require us to attract and retain highly qualified personnel to develop and manufacture products that feature technological innovations and bring them to market on a timely basis.  Our complex operations also require us to attract and retain highly qualified administrative personnel in functions such as legal, tax, accounting, financial reporting, auditing, and treasury.  The market for personnel with such qualifications is highly competitive.  While we have employment agreements with certain of our executives, we have not entered into employment agreements with all of our key personnel.

The loss of the services of or the failure to effectively recruit qualified personnel could have a material adverse effect on our business.

We rely on the efficient and uninterrupted operation of complex information technology systems and networks to operate our business. Any significant system or network disruption, including, but not limited to, new system implementations, computer viruses, security breaches, phishing, spoofing, cyberattacks, facility issues or energy blackouts could have a material adverse impact on our operations and results of operations.  These incidents, which might be related to industrial or other espionage, include covertly introducing malware and spyware to our computers and networks (or to an electronic system operated by a third party for our benefit) and impersonating authorized users, among others.  Such a network disruption could result in a loss of the confidentiality of our intellectual property or the release of sensitive competitive information or customer, supplier or employee personal data. Any loss of such information could harm our competitive position, result in a loss of customer confidence, and cause us to incur significant costs to remedy the damages caused by the disruptions or security breaches. We have implemented protective measures to prevent against and limit the effects of system or network disruptions, but there can be no assurance that such measures will be sufficient to prevent or limit the damage from any disruptions and any such disruption could have a material adverse impact on our business and results of operations.

Third-party service providers, such as foundries, subcontractors, distributors, and vendors have access to certain portions of our sensitive data. In the event that these service providers do not properly safeguard our data that they hold, security breaches and loss of our data could result.  Any such loss of data by our third-party service providers could have a material adverse impact on our business and results of operations.

We are exposed to changes in interest rates as a result of our borrowing activities and our cash balances. Our credit facility bears interest at variable rates based on LIBOR. A significant increase in LIBOR would significantly increase our interest expense. A general increase in interest rates would be largely offset by an increase in interest income earned on our cash and short-term investment balances, which are currently greater than our debt balances. However, there can be no assurance that the interest rate earned on cash and short-term investments will move in tandem with the interest rate paid on our variable rate debt.

If we were to undertake a substantial acquisition for cash, the acquisition would likely need to be financed in part through bank borrowings or the issuance of public or private debt. This acquisition financing would likely decrease our ratio of earnings to fixed charges and adversely affect other leverage criteria. Under our credit facility, we are required to obtain the lenders’ consent for certain additional debt financing and to comply with other covenants including the application of specific financial ratios. We cannot make any assurances that the necessary acquisition financing would be available to us on acceptable terms if and when required. If we were to undertake an acquisition for equity, the acquisition may have a dilutive effect on the interests of the holders of our common stock.

Regulatory and compliance related risks

Our operations, products and/or product packaging are subject to, among other matters, environmental laws and regulations governing, among other matters, air emissions, wastewater discharges, the handling, disposal and remediation of hazardous substances, wastes and certain chemicals used or generated in our manufacturing processes, employee health and safety labeling or other notifications with respect to the content or other aspects of our processes, products or packaging, restrictions on the use of certain materials in or on design aspects of our products or product packaging, and responsibility for disposal of products or product packaging. We establish reserves for specifically identified potential environmental liabilities. Nevertheless, we have in the past and may in the future inherit certain pre-existing environmental liabilities, generally based on successor liability doctrines, or otherwise incur environmental liabilities. We are involved in remediation programs and related litigation at various current and former properties and at third-party disposal sites both within and outside of the United States, including involvement as a potentially responsible party at Superfund sites. Although we have never been involved in any environmental matter that has had a material adverse impact on our overall operations, there can be no assurance that in connection with any past or future acquisition, future developments, including related to our remediation programs, or otherwise, we will not be obligated to address environmental matters that could have a material adverse impact on our results of operations. In addition, more stringent environmental laws and regulations may be enacted in the future, and we cannot presently determine the modifications, if any, in our operations that any such future regulations might require, or the cost of compliance with current and future laws and regulations. In order to resolve liabilities at various sites, we have entered into various administrative orders and consent decrees, some of which may be, under certain conditions, reopened or subject to renegotiation.

We sell products under prime and subprime contracts with the U.S. government and other governments. Many of these products are used in military applications. Government contractors must comply with specific procurement regulations and other requirements. These requirements, although customary in government contracts, impact our performance and compliance costs.  Failure to comply with these regulations and requirements could result in contract modifications or termination, and the assessment of penalties and fines, which could negatively impact our results of operations and financial condition. Our failure to comply with these regulations and requirements could also lead to suspension or debarment, for cause, from government contracting or subcontracting for a period of time. Among the causes for debarment are violations of various statutes, including those related to procurement integrity, export control, government security regulations, employment practices, protection of the environment, accuracy of records and the recording of costs, and foreign corruption. The termination of a government contract as a result of any of these acts could have a negative impact on our results of operations and financial condition and could have a negative impact on our reputation and ability to procure other government contracts in the future.

We have qualified certain of our products under various military specifications approved and monitored by the United States Defense Electronic Supply Center and under certain European military specifications. These products are assigned certain classification levels. In order to maintain the classification level of a product, we must continuously perform tests on the products and the results of these tests must be reported to governmental agencies. If a product fails to meet the requirements of the applicable classification level, its classification may be reduced to a lower level. A decrease in the classification level for a product with a military application could have an adverse impact on the net revenues and earnings attributable to that product.

Our credit facility includes restrictions on, among other things, incurring indebtedness, incurring liens on assets, making investments and acquisitions, making asset sales, and paying cash dividends and making other restricted payments. Our credit facility also requires us to comply with other covenants, including the maintenance of specific financial ratios. If we are not in compliance with all of such covenants, the credit facility could be terminated by the lenders, and all amounts outstanding pursuant to the credit facility could become immediately payable. Additionally, our convertible debt instruments have cross-default provisions that could accelerate repayment in the event the indebtedness under the credit facility is accelerated.

Risks associated with our operations outside the United States

We have substantial operations outside the United States, and approximately 75% of our revenues during 2020 were derived from sales to customers outside the United States.  Certain of our assets are located, and certain of our products are produced, in countries which are subject to risks of social, political, economic, and military instability. This instability could result in wars, riots, nationalization of industry, currency fluctuation, and labor unrest. These conditions could have an adverse impact on our ability to operate in these regions and, depending on the extent and severity of these conditions, could materially and adversely affect our overall financial condition, results of operations, and our ability to access our liquidity.

Our business has been in operation in Israel for 50 years, where we have substantial manufacturing operations. Although we have never experienced any material interruption in our operations attributable to these factors, in spite of several Middle East crises, including wars, our financial condition and results of operations might be adversely affected if events were to occur in the Middle East that interfered with our operations in Israel.

The U.S. Foreign Corrupt Practices Act and similar foreign anti-corruption laws generally prohibit companies and their intermediaries from making improper payments or providing anything of value to improperly influence foreign government officials for the purpose of obtaining or retaining business, or obtaining an unfair advantage. Recent years have seen a substantial increase in the global enforcement of anti-corruption laws. Our continued operation and expansion outside the United States, including in developing countries, could increase the risk of such violations or violations under other regulations relating to limitations on or licenses required for sales made to customers located in certain countries. Violations of these laws may result in severe criminal or civil sanctions, could disrupt our business, and result in a material adverse effect on our reputation, business and results of operations or financial condition.

Historically, our primary labor cost controlling strategy was to transfer manufacturing operations to countries with lower production costs, such as the Dominican Republic, India, Malaysia, Mexico, the People’s Republic of China, and the Philippines. We believe that our manufacturing footprint is suitable to serve our customers and end markets, while maintaining lower manufacturing costs. We do not anticipate further transferring any significant existing operations to lower-labor-cost countries; however, acquired operations may be transferred to lower-labor-cost countries when integrated into Vishay. Currently, our primary labor cost controlling strategy involves reducing hours and limiting the use of subcontractors and foundries when demand for our products decreases. Shifting operations to lower-labor-cost countries, reducing hours, or limiting the use of subcontractors and foundries could result in production inefficiencies, higher costs, and/or strikes or other types of labor unrest.

We are exposed to foreign currency exchange rate risks, particularly due to market values of transactions in currencies other than the functional currencies of certain subsidiaries. From time to time, we utilize forward contracts to hedge a portion of projected cash flows from these exposures.

Our significant foreign subsidiaries are located in Germany, Israel, and Asia. We finance our operations in Europe and certain locations in Asia in local currencies. Our operations in Israel and most significant locations in Asia are largely financed in U.S. dollars, but these subsidiaries also have significant transactions in local currencies. Our exposure to foreign currency risk is mitigated to the extent that the costs incurred and the revenues earned in a particular currency offset one another. Our exposure to foreign currency risk is more pronounced in situations where, for example, production labor costs are predominantly paid in local currencies while the sales revenue for those products is denominated in U.S. dollars. This is particularly the case for products produced in Israel, the Czech Republic, and China.

A change in the mix of the currencies in which we transact our business could have a material effect on results of operations. Furthermore, the timing of cash receipts and disbursements could have a material effect on our results of operations, particularly if there are significant changes in exchange rates in a short period of time.

We generate a significant amount of cash and profits from our non-U.S. subsidiaries.  We used substantially all of the amounts repatriated in 2018, 2019, and 2020 to significantly re-shape the capital structure of the Company.  As of December 31, 2020, substantially all of our cash and cash equivalents and short-term investments were held by subsidiaries outside of the United States.  Our unused revolving credit facility provides us with additional U.S. liquidity.

U.S. tax obligations, cash dividends to stockholders, share repurchases, additional convertible debt repurchases, and principal and interest payments on our debt instruments need to be paid by our U.S. parent company, Vishay Intertechnology, Inc.  Our U.S. subsidiaries have other operating cash needs.

If our U.S. cash and cash equivalents and short-term investment and other liquidity sources are inadequate to satisfy these obligations, we may be required to repatriate additional cash to the United States.  If we are unable to repatriate adequate cash to the United States to satisfy these obligations, it could materially and adversely affect our overall financial condition, results of operations and our liquidity.

Our business is subject to risks associated with U.S. and foreign legislation and regulations relating to imports, including quotas, duties, tariffs or taxes, and other import charges or restrictions, which could adversely affect our operations and our ability to import products. The U.S. has taken actions that impact U.S. trade with China, including imposing tariffs on certain goods manufactured in China and imported into the U.S., including certain of our products.  Such actions may impact our competitiveness and adversely affect the demand for these products, or if those costs cannot be passed on to our customers, could adversely impact our results of operations for affected segments and the Company as a whole.  

Further changes in U.S. trade policy could trigger additional retaliatory actions by affected countries.  If these consequences are realized, it could result in a general economic downturn or otherwise have a material adverse effect on our business.

Risks related to our capital structure

We have two classes of common stock: common stock and Class B common stock. The holders of common stock are entitled to one vote for each share held, while the holders of Class B common stock are entitled to 10 votes for each share held. At December 31, 2020, the holders of Class B common stock held approximately 47.7% of the voting power of the Company. The ownership of Class B common stock is highly concentrated, and holders of Class B common stock effectively can cause the election of directors and approve other actions as stockholders.  Mrs. Ruta Zandman (a member of our Board of Directors) controls the voting of, solely or on a shared basis with Marc Zandman (our Executive Chairman) and Ziv Shoshani (a member of our Board of Directors), approximately 89.7% of our Class B common stock and 42.9% of the total voting power of our capital stock as of December 31, 2020. Holders of our Class B common stock may act in ways that are contrary to, or not in the best interests of, holders of our common stock.  The voting rights of the holders of our Class B common stock effectively give such holders the ability to prevent transactions that would result in a change in control of us, including transactions in which holders of our common stock might otherwise receive a premium for their shares over the then-current market price.

Our overall long-term business strategy has historically included a strong focus on acquisitions financed alternatively through cash on hand or the incurrence of indebtedness. We may in the future be presented with attractive investment or strategic opportunities that, because of their size and our financial condition at the time, would require the issuance of substantial additional amounts of our common stock.  If such opportunities were to arise, our Board of Directors may consider the potentially dilutive effect on the interests and voting power of our existing stockholders, including our Class B stockholders, and may therefore be reluctant to authorize the issuance of additional shares. Any such reluctance could impede our ability to complete certain transactions.

We believe that many investors in, and potential purchasers of, convertible debt instruments employ, or seek to employ, a convertible arbitrage strategy with respect to these instruments. Investors that employ a convertible arbitrage strategy with respect to convertible debt instruments typically implement that strategy by selling short the common stock underlying the convertible instrument and dynamically adjusting their short position while they hold the instrument. The implementation of this strategy by investors in our convertible debentures, as well as related market regulatory actions, could have a significant impact on the trading prices of our common stock, and the trading prices and liquidity of our convertible debentures. The price of our common stock and our convertible debentures could also be affected by possible sales of our common stock by investors who view our convertible debentures as more attractive means of equity participation in us.

We are a Delaware corporation, and the anti-takeover provisions of Delaware law impose various impediments to the ability of a third party to acquire control of us, even if a change in control would be beneficial to our existing stockholders. Our amended and restated certificate of incorporation and amended and restated bylaws also contain provisions that could delay or prevent a change in control of our company. These provisions could also make it difficult for stockholders to elect directors that are not nominated by the current members of our board of directors or take other corporate actions, including effecting changes in our management. These provisions include:

In addition, as a Delaware corporation, we are subject to Section 203 of the Delaware General Corporation Law. This statute prohibits a Delaware corporation listed on a national securities exchange from engaging in a business combination with an interested stockholder (generally a person who, together with its affiliates, owns or within the last three years has owned 15% or more of our voting stock subject to certain exceptions) for a period of three years after the date of the transaction in which the person became an interested stockholder, unless the business combination is approved in a prescribed manner. The application of Section 203 also could have the effect of delaying or preventing a change in control of us. Any of these provisions could, under certain circumstances, depress the market price of our common stock.

The ability of our board of directors or a committee thereof to create and issue a new series of preferred stock and certain provisions of Delaware law and our certificate of incorporation and bylaws could impede a merger, takeover attempt or other business combination involving us or discourage a potential acquirer from making a tender offer for our common stock, which, under certain circumstances, could reduce the market price of our common stock.

Risks related to the spin-off of the Vishay Precision Group

VPG has a worldwide, perpetual and royalty-free license from us to use the “Vishay” mark as part of its corporate name and in connection with the manufacture, sale, and marketing of the products and services that comprise its measurements and foil resistors businesses. The license of the Vishay name to VPG is important to VPG because the success of VPG depends on the reputation of the Vishay brand for these products and services built over many years.  Nonetheless, there exists the risk that the use by VPG could cause confusion in the marketplace over the products of the two companies, that any negative publicity associated with a product or service of VPG following the spin-off could be mistakenly attributed to our company or that we could lose our own rights to the “Vishay” mark if we fail to impose sufficient controls on VPG’s use of the mark.

General Risk Factors

In addition to the risks relating specifically to our business, a variety of other factors relating to general conditions could cause actual results, performance, or achievements to differ materially from those expressed in any of our forward-looking statements. These factors include:

Our common stock, traded on the New York Stock Exchange, has in the past experienced, and may continue to experience, significant fluctuations in price and volume. We believe that the financial performance and activities of other publicly traded companies in the electronic component industry could cause the price of our common stock to fluctuate substantially without regard to our operating performance.

We operate in a continually changing business environment, and new factors emerge from time to time.  Other unknown and unpredictable factors also could have a material adverse effect on our future financial condition and results of operations.

None.

At December 31, 2020, our business had 54 manufacturing locations. Our manufacturing facilities include owned and leased locations. Some locations include both owned and leased facilities in the same location. The list of manufacturing facilities below excludes former manufacturing facilities that are not presently used for manufacturing activities due to our restructuring activities. See Note 4 to our consolidated financial statements for further information related to our restructuring efforts, as well as additional information in “Cost Management” included in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

In the opinion of management, our properties and equipment generally are in good operating condition and are adequate for our present needs. Owning many of our manufacturing facilities provides us meaningful financial and operating benefits, including long-term stability and a necessary buffer for economic downturns. We do not anticipate difficulty in renewing existing leases as they expire or in finding alternative facilities.

The principal locations of our owned manufacturing facilities, along with available space including administrative offices, are as follows:

The principal locations of our leased manufacturing facilities, along with available space including administrative offices, are as follows:

From time to time we are involved in routine litigation incidental to our business. Management believes that such matters, either individually or in the aggregate, should not have a material adverse effect on our business or financial condition.

Intellectual Property Matters

We are engaged in discussions with various parties regarding patent licensing and cross patent licensing issues. In addition, we have observed that in the current business environment, electronic component and semiconductor companies have become more aggressive in asserting and defending patent claims against competitors. We are a party to disputes alleging infringement of third-party patents.  When we believe other companies are misappropriating our intellectual property rights, we vigorously enforce those rights through legal action, and we intend to continue to do so.

Environmental Matters

Vishay is involved in environmental remediation programs at various sites currently or formerly owned by Vishay and its subsidiaries both within and outside of the U.S., in addition to involvement as a potentially responsible party (“PRP”) at Superfund sites. Certain obligations as a PRP have arisen in connection with business acquisitions. The remediation programs are on-going and the ultimate cost of site cleanup is difficult to predict given the uncertainties regarding the extent of the required cleanup, the interpretation of applicable laws and regulations, and alternative cleanup methods. See also Note 13 to our consolidated financial statements.

Vishay GSI, Inc. (“VGSI”), a wholly owned subsidiary of the Company, is a direct defendant in two separate, but related, litigation matters: (1) 101 Frost Street Associates, L.P. v. United States Department of Energy et al.; and (2) Hicksville Water District v. United States Department of Energy, et al.  VGSI is also a third-party defendant in a third related matter, United States v Island Transportation Corp. et al. All three cases are pending in the United State District Court for the Eastern District of New York.

The three cases contain claims for recovery of response costs under the Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA”), and allege that a predecessor’s manufacturing operations in Hicksville, New York (the “Site”), between 1960 and 1993, impacted groundwater beneath and downgradient of the Site.  The groundwater beneath and downgradient of the Site is part of the New Cassel/Hicksville Groundwater Contamination Site, which was added to the National Priorities List pursuant to CERCLA on September 15, 2011.  The Company is vigorously contesting plaintiff’s claims and will aggressively prosecute its affirmative claims.

None.

The following table sets forth certain information regarding our executive officers as of February 24, 2021:

* Member of the Executive Committee of the Board of Directors.

Marc Zandman was appointed Executive Chairman of the Board and Chief Business Development Officer effective June 5, 2011. Mr. Zandman has served as a Director of Vishay since 2001 and President of Vishay Israel Ltd. since 1998. Mr. Zandman previously was Vice Chairman of the Board from 2003 to June 2011, and Chief Administration Officer from 2007 to June 2011. Mr. Zandman was Group Vice President of Vishay Measurements Group from 2002 to 2004. Mr. Zandman has served in various other capacities with Vishay since 1984. He is the son of the late Dr. Felix Zandman, Vishay’s Founder. Mr. Zandman controls, on a shared basis with Ruta Zandman and Ziv Shoshani, approximately 34.0% of the total voting power of our capital stock as of December 31, 2019.  He also is non-executive Chairman of Vishay Precision Group, Inc., an independent, publicly-traded company spun-off from Vishay Intertechnology in 2010.

Dr. Gerald Paul was appointed Chief Executive Officer effective January 1, 2005. Dr. Paul has served as a Director of the Company since 1993, and has been President of the Company since March 1998. Dr. Paul also was Chief Operating Officer from 1996 to 2006. Dr. Paul previously was an Executive Vice President of the Company from 1996 to 1998, and President of Vishay Electronic Components, Europe from 1994 to 1996. Dr. Paul has been Managing Director of Vishay Electronic GmbH, a subsidiary of the Company, since 1991.  Dr. Paul has been employed by Vishay and a predecessor company since 1978.

Lori Lipcaman was appointed Executive Vice President and Chief Financial Officer of the Company effective September 1, 2011.  Ms. Lipcaman had been appointed Executive Vice President Finance and Chief Accounting Officer in September 2008.  Previously, she served as Vishay’s Corporate Senior Vice President, Operations Controller, from March 1998 to September 2008.  Prior to that, she served in various positions of increasing responsibility in finance and controlling since joining the Company in May 1989.

Johan Vandoorn was appointed Executive Vice President and Chief Technical Officer effective August 1, 2011.  Mr. Vandoorn is responsible for Vishay’s technical development and internal growth programs.  Mr. Vandoorn has held various positions of increasing responsibility since Vishay’s acquisition of BCcomponents Holdings BV (“BCcomponents”) in 2002, including Executive Vice President – Passive Components (2006 – 2012).  Mr. Vandoorn had been Vice President – Global Operations of BCcomponents from 2000 until its acquisition by Vishay, and previously worked for Philips Components (“Philips”) from 1980 until Philips sold the BCcomponents business to a private equity firm in 1998.

Joel Smejkal was appointed Executive Vice President Corporate Business Development effective July 1, 2020.  Mr. Smejkal previously was Executive Vice President and Business Head Passive Components from 2017.  Mr. Smejkal has held various positions of increasing responsibility since joining Vishay in 1990 including Senior Vice President Global Distribution Sales (2012 - 2016).  Mr. Smejkal's experience with Vishay includes worldwide and divisional leadership roles in engineering, marketing, operations and sales.  He was a product developer of 18 U.S. Patents for the Power Metal Strip® resistor technology and brings significant business development, marketing and sales experience.

Clarence Tse was appointed Executive Vice President and Business Head Semiconductors effective January 1, 2017.  Mr. Tse has held various positions of increasing responsibility since Vishay's acquisition of Siliconix/Telefunken in 1998, including Senior Vice President, Diodes Division (2008 - 2016), Senior Vice President, Power Diodes Division (2002 - 2008) and Vice President, Finance and Administration Asia (1998 - 2001).  Mr. Tse was first hired by Siliconix in 1985.

Jeff Webster was appointed Executive Vice President and Business Head Passive Components effective July 1, 2020.  Mr. Webster has held various positions of increasing responsibility since joining Vishay in 2000 including Senior Vice President Global Quality (2014 - 2019) and Vice President Global Quality - Actives (2000 - 2014).  Prior to joining Vishay, Mr. Webster worked for Intersil.  Mr. Webster's experience includes roles in Quality, Operations, and R&D.

Andreas Randebrock was appointed Executive Vice President Global Human Resources effective July 1, 2020.  Mr. Randebrock has been working for Vishay since 2015 as Senior Vice President Employee Development.  Before Mr. Randebrock joined Vishay he worked as a management consultant in the field of leadership, human resources, and organizational consulting for more than 20 years.  From 1998 until 2015, Mr. Randebrock was employed by the global human resources consultancy Hay Group (acquired in 2015 by Korn Ferry) where he held various positions of increasing responsibility and was a partner.

Our common stock is listed on the New York Stock Exchange under the symbol VSH. The following table sets forth the high and low sales prices for our common stock as reported on the New York Stock Exchange composite tape for the indicated fiscal quarters. Holders of record of our common stock totaled approximately 1,000 at February 22, 2021. Because many of the shares of our common stock are held by brokers and other institutions on behalf of stockholders, we are unable to estimate the total number of beneficial owners represented by these stockholders of record.

In 2014, the Company's Board of Directors instituted a quarterly cash dividend program and declared the first cash dividend in the history of Vishay. Quarterly cash dividends have been paid in each quarter since the first fiscal quarter of 2014.  We expect to continue to pay quarterly dividends, although the amount and timing of any future dividends remains subject to authorization of our Board of Directors.

The following table sets forth, for the indicated periods, the high and low sales prices of our common stock and the quarterly cash dividends declared.

At February 22, 2021, we had outstanding 12,097,148 shares of Class B common stock, par value $.10 per share, each of which entitles the holder to ten votes. The Class B common stock generally is not transferable except in certain very limited instances, and there is no market for those shares. The Class B common stock is convertible, at the option of the holder, into common stock on a share for share basis.  As a result of the passing of our founder and former Executive Chairman, Dr. Felix Zandman, Mrs. Ruta Zandman (a member of our Board of Directors) controls the voting of, solely or on a shared basis with Marc Zandman (our Executive Chairman) and Ziv Shoshani (a member of our Board of Directors) approximately 89.7% of our Class B common stock and 42.9% of the total voting power of our capital stock as of December 31, 2020.

Certain of our debt obligations contain restrictions as to the payment of cash dividends.  See "Financial Condition, Liquidity, and Capital Resources" included in Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations."

On November 17, 2020, the Company’s Board of Directors extended the authorization of the Executive Committee of the Board to execute a program to repurchase up to $150 million of common stock on the open market. Such transactions are subject to market and business conditions, legal requirements, and other factors. The program implementing such authorization does not obligate us to acquire any shares of common stock, and it may be terminated or suspended at any time at our discretion, in accordance with applicable laws and regulations.  No shares have been repurchased pursuant to this program.

In the fourth fiscal quarter of 2020, the Company repurchased $2.6 million of the Company's convertible senior debentures due 2041.  The aggregate purchase price for the repurchases was $3.5 million.  The convertible senior debentures the Company repurchased in the fourth fiscal quarter had been convertible into approximately 0.2 million shares of Vishay common stock, assuming physical settlement.

Stock Performance Graph

The line graph below compares the cumulative total stockholder return on Vishay’s common stock over a 5-year period with the returns on the Standard & Poor’s MidCap 400 Stock Index (of which Vishay is a component), the Standard & Poor’s 500 Stock Index, and the Philadelphia Semiconductor Index. The line graph assumes that $100 had been invested at December 31, 2015 and assumes that all dividends were reinvested.

Not applicable.

This Management's Discussion and Analysis (“MD&A”) is intended to provide an understanding of Vishay's financial condition, results of operations and cash flows by focusing on changes in certain key measures from year to year. The MD&A should be read in conjunction with our Consolidated Financial Statements and accompanying Notes filed herewith, commencing on page F-1 of this report.  This discussion contains forward-looking statements that involve risks and uncertainties.  Our actual results could differ materially from those anticipated in these forward-looking statements as a result of various factors, including those discussed elsewhere in this Annual Report on Form 10-K, particularly in Item 1A. “Risk Factors.”

Overview

Vishay Intertechnology, Inc. ("Vishay," "we," "us," or "our") manufactures one of the world’s largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets.

We operate in six segments based on product functionality: MOSFETs, Diodes, Optoelectronic Components, Resistors, Inductors, and Capacitors.

We are focused on enhancing stockholder value by growing our business and improving earnings per share.  Since 1985, we have pursued a business strategy of growth through focused research and development and acquisitions.  We plan to continue to grow our business through intensified internal growth supplemented by opportunistic acquisitions, while at the same time maintaining a prudent capital structure. To foster intensified internal growth, we have increased our worldwide R&D and engineering technical staff; we are expanding critical manufacturing capacities; we are increasing our technical field sales force in Asia to increase our market access to the industrial segment and increase the design-in of our products in local markets; and we are directing increased funding and focus on developing products to capitalize on the connectivity, mobility, and sustainability growth drivers of our business.  In addition to our growth plan, we also have opportunistically repurchased our stock and, as further described below, reduced dilution risks by repurchasing substantially all of our convertible senior debentures.

In 2014, our Board of Directors instituted a quarterly dividend payment program and declared the first cash dividend in the history of Vishay. We have paid dividends each quarter since the first fiscal quarter of 2014, and further increased the quarterly cash dividend by 12% to $0.095 per share in the second fiscal quarter of 2019.

We have been re-shaping our capital structure since the enactment of the U.S. Tax Cuts and Jobs Act (“TCJA”) in December 2017.  We repatriated over $1 billion (net of withholding taxes) of cash to the United States since the enactment of the TCJA.  In 2019, we replaced our existing credit agreement that was due to expire in December 2020 with a new agreement that will expire in June 2024. Among other benefits of the new credit facility, the aggregate commitment of revolving loans increased to $750 million with the ability to request up to $300 million of incremental facilities, subject to the satisfaction of certain conditions.  We used the net proceeds from the 2018 issuance of $600 million principal amount of new convertible senior notes due 2025 and repatriated cash to reduce the amount of our outstanding convertible senior debentures, which had become less tax-efficient because of the TCJA, from $575 million to $0.3 million as of December 31, 2020.  On February 4, 2021, we redeemed the remaining convertible senior debentures.  On May 20, 2020, our Board of Directors authorized a program to repurchase up to $200 million of the outstanding convertible senior notes due 2025 in open market repurchases or through privately negotiated transactions.  Such transactions provide us more flexibility to adjust our debt levels if necessary.  We repurchased $134.7 million principal amount of convertible senior notes in the year ended December 31, 2020.  Our debt instruments and transactions are more fully described in Note 6 to the consolidated financial statements.

Our business and operating results have been and will continue to be impacted by worldwide economic conditions.  Our revenues are dependent on end markets that are impacted by consumer and industrial demand, and our operating results can be adversely affected by reduced demand in those global markets.  The worldwide economy and, specifically, our business have been impacted by the outbreak of the coronavirus ("COVID-19").   The pandemic has significantly impacted the global market, including our customers, suppliers, and shipping partners, which has impacted our net revenues.  We have also incurred incremental costs separable from normal operations that are directly attributable to the pandemic and containment efforts, primarily salaries and wages for employees impacted by quarantines and additional safety measures, including masks and temperature scanners, which were partially offset by government subsidies.  The net impact of the costs and subsidies are classified as cost of products sold of $4.6 million and selling, general, and administrative benefits of $1.5 million based on employee function on the consolidated statement of operations for the year ended December 31, 2020.  We exclude from the amounts reported above indirect financial changes from the COVID-19 pandemic such as general macroeconomic effects and higher shipping costs due to reduced shipping capacity.  See additional information regarding our competitive strengths and key challenges as disclosed in Part 1.

We believe the economic impact of the COVID-19 pandemic on Vishay will be temporary.  We have significant liquidity to withstand the temporary disruptions in the economic environment. However, we continue to closely monitor our fixed costs, capital expenditure plans, inventory, and capital resources to respond to changing conditions and to ensure we have the management, business processes, and resources to meet our future needs.  We will react quickly and professionally to changes in demand to minimize manufacturing inefficiencies and excess inventory build.  In the third fiscal quarter of 2019, we announced global cost reduction and management rejuvenation programs as part of our continuous efforts to improve efficiency and operating performance, which were fully implemented by the end of 2020.  Our cost reduction program is more fully described in Note 4 to the consolidated financial statements and in "Cost Management" below. 

We utilize several financial metrics, including net revenues, gross profit margin, segment operating income, end-of-period backlog, book-to-bill ratio, inventory turnover, change in average selling prices, net cash and short-term investments (debt), and free cash generation to evaluate the performance and assess the future direction of our business.  See further discussion in “Financial Metrics” and “Financial Condition, Liquidity, and Capital Resources” below.  The COVID-19 pandemic has impacted almost all key financial metrics throughout 2020.  We experienced a broad recovery in orders and sales beginning in the third fiscal quarter of 2020 that accelerated in the fourth fiscal quarter, primarily due to increased demand from distributors.  The increases in orders and sales positively impacted almost all key financial metrics.

Net revenues for the year ended December 31, 2020 were $2.502 billion, compared to net revenues of $2.668 billion and $3.035 billion for the years ended December 31, 2019 and 2018, respectively.  Net earnings attributable to Vishay stockholders for the year ended December 31, 2020 were $122.9 million, or $0.85 per diluted share, compared to $163.9 million, or $1.13 per diluted share, and $345.8 million, or $2.24 per share, for the years ended December 31, 2019 and 2018, respectively.

We define adjusted net earnings as net earnings determined in accordance with GAAP adjusted for various items that management believes are not indicative of the intrinsic operating performance of our business.  We define free cash as the cash flows generated from continuing operations less capital expenditures plus net proceeds from the sale of property and equipment.  The reconciliations below include certain financial measures which are not recognized in accordance with GAAP, including adjusted net earnings, adjusted earnings per share, and free cash.  These non-GAAP measures should not be viewed as alternatives to GAAP measures of performance or liquidity.  Non-GAAP measures such as adjusted net earnings, adjusted earnings per share, and free cash do not have uniform definitions.  These measures, as calculated by Vishay, may not be comparable to similarly titled measures used by other companies. Management believes that adjusted net earnings and adjusted earnings per share are meaningful because they provide insight with respect to our intrinsic operating results.  Management believes that free cash is a meaningful measure of our ability to fund acquisitions, repay debt, and otherwise enhance stockholder value through stock repurchases or dividends.

Net earnings attributable to Vishay stockholders for the years ended December 31, 2020, 2019, and 2018 include items affecting comparability.  The items affecting comparability are (in thousands, except per share amounts):

Although the term "free cash" is not defined in GAAP, each of the elements used to calculate free cash is presented as a line item on the face of our consolidated statements of cash flows prepared in accordance with GAAP.

Our results for 2020 represent the impacts of the COVID-19 pandemic on our business that resulted in a sharp decrease in demand in first half of the year followed by a sharp and broad recovery in the latter part of the year.  Our results for 2019 represent the effects of the normalization of demand that we began to experience in the fourth fiscal quarter of 2018 and accelerated through 2019.  Our percentage of euro-based sales approximates our percentage of euro-based expenses so the euro foreign currency impact on revenues was substantially offset by the impact on expenses.  Our pre-tax results were consistent with expectations based on our business model.

Our free cash results were significantly impacted by the payment of cash taxes related to the cash repatriated to the U.S. of $16.3 million, $38.8 million and $156.8 million in 2020, 2019, and 2018, respectively, and the installment payments of the U.S. transition tax of $14.8 million in each year in the reporting period.

Financial Metrics

We utilize several financial metrics to evaluate the performance and assess the future direction of our business. These key financial measures and metrics include net revenues, gross profit margin, operating margin, segment operating income, end-of-period backlog, and the book-to-bill ratio. We also monitor changes in our inventory turnover and our or publicly available average selling prices (“ASP”).

Gross profit margin is computed as gross profit as a percentage of net revenues. Gross profit is generally net revenues less costs of products sold, but also deducts certain other period costs, particularly losses on purchase commitments and inventory write-downs. Losses on purchase commitments and inventory write-downs have the impact of reducing gross profit margin in the period of the charge, but result in improved gross profit margins in subsequent periods by reducing costs of products sold as inventory is used. Gross profit margin is clearly a function of net revenues, but also reflects our cost management programs and our ability to contain fixed costs.

Operating margin is computed as gross profit less operating expenses as a percentage of net revenues. We evaluate business segment performance on segment operating margin. Only dedicated, direct selling, general, and administrative expenses of the segments are included in the calculation of segment operating income. Segment operating margin is computed as operating income less items such as restructuring and severance costs, asset write-downs, goodwill and indefinite-lived intangible asset impairments, inventory write-downs, gain or losses on purchase commitments, global operations, sales and marketing, information systems, finance and administrative groups, and other items, expressed as a percentage of net revenues. We believe that evaluating segment performance excluding such items is meaningful because it provides insight with respect to intrinsic operating results of the segment. Operating margin is clearly a function of net revenues, but also reflects our cost management programs and our ability to contain fixed costs.

End-of-period backlog is one indicator of future revenues. We include in our backlog only open orders that we expect to ship in the next twelve months. If demand falls below customers’ forecasts, or if customers do not control their inventory effectively, they may cancel or reschedule the shipments that are included in our backlog, in many instances without the payment of any penalty. Therefore, the backlog is not necessarily indicative of the results to be expected for future periods.

An important indicator of demand in our industry is the book-to-bill ratio, which is the ratio of the amount of product ordered during a period as compared with the product that we ship during that period. A book-to-bill ratio that is greater than one indicates that our backlog is building and that we are likely to see increasing revenues in future periods. Conversely, a book-to-bill ratio that is less than one is an indicator of declining demand and may foretell declining revenues.

We focus on our inventory turnover as a measure of how well we are managing our inventory. We define inventory turnover for a financial reporting period as our costs of products sold for the four fiscal quarters ending on the last day of the reporting period divided by our average inventory (computed using each fiscal quarter-end balance) for this same period. A higher level of inventory turnover reflects more efficient use of our capital.

Pricing in our industry can be volatile.  Using our and publicly available data, we analyze trends and changes in average selling prices to evaluate likely future pricing. The erosion of average selling prices of established products is typical for semiconductor products.  We attempt to offset this deterioration with ongoing cost reduction activities and new product introductions.  Our specialty passive components are more resistant to average selling price erosion.  All pricing is subject to governing market conditions and is independently set by us.

The quarter-to-quarter trends in these financial metrics can also be an important indicator of the likely direction of our business. The following table shows net revenues, gross profit margin, operating margin, end-of-period backlog, book-to-bill ratio, inventory turnover, and changes in ASP for our business as a whole during the five fiscal quarters beginning with the fourth fiscal quarter of 2019 through the fourth fiscal quarter of 2020 (dollars in thousands):